dBm, mW, W, dBµV and volts converter
Type a value in any box and every other unit updates at once: dBm, dBW, milliwatts, watts, volts and dBµV, for 50 Ω, 75 Ω or any impedance.
Shortcuts: 224m = 0.224, 10u = 0.00001, 1e-9. The box you typed in stays as it is when you change the impedance.
0 dBm = 1 mW = 223.6 mV rms = 106.99 dBµV into 50 Ω.
| dBm | Power | V rms at 50 Ω | dBµV |
|---|
Press a level in the table to load it into the converter.
How to use the dBm converter
- Pick the impedance: 50 Ω for radios and test gear, 75 Ω for TV, satellite and cable systems, or Other to type your own.
- Type your value in the box with the right unit, for example 20 in dBm or 0.5 in W. The ± button flips the sign.
- Read every other unit straight away. Press a row in the quick table to load a common level, then use Copy all units or Share link.
Worked examples
20 dBm to watts. Take 30 away to get dBW: 20 − 30 = −10 dBW. Divide by 10 and raise 10 to that power: 10−1 = 0.1 W, which is 100 mW. The quick way is to count in tens: 0 dBm is 1 mW, 10 dBm is 10 mW and 20 dBm is 100 mW. Every 3 dB is close to double, so 23 dBm is about 200 mW and 17 dBm about 50 mW.
0 dBm into 50 Ω. Power is voltage squared divided by resistance, so V = √(P × R) = √(0.001 × 50) = √0.05 = 0.224 V rms. For a sine wave the peak is √2 times higher, 0.316 V, and peak-to-peak twice that, 0.632 V. In dBµV that is 20 × log10(223,607) = 106.99, which is where the "add 107" rule comes from. At 75 Ω the same milliwatt is 0.274 V rms and 108.75 dBµV.
The other way round. An EMC receiver shows 40 dBµV on a 50 Ω input. Take away 107 and you have −67 dBm, about 0.2 nanowatts. Type 40 into the dBµV box and the converter shows −66.99 dBm and 0.2 nW.
Common levels table
Radio levels cover a huge range. A transmitter puts out watts, and the receiver at the other end often works with a few picowatts. These are real reference points to help you feel the scale:
| Level | Power | Where you meet it |
|---|---|---|
| +80 dBm | 100 kW | The highest ERP allowed for a full-power (Class C) FM station in the USA |
| +33 dBm | 2 W | A GSM phone at full power on the 900 MHz band |
| +23 dBm | 200 mW | The maximum of most 4G and 5G phones (power class 3) |
| +20 dBm | 100 mW | The most a 2.4 GHz WiFi device may radiate in Europe (EIRP); a class 1 Bluetooth radio |
| 0 dBm | 1 mW | The reference point of the scale |
| −30 dBm | 1 µW | A very strong WiFi signal, right next to the router |
| −67 dBm | 0.2 nW | A level many WiFi design guides use as the target for voice and video calls |
| −90 dBm | 1 pW | A weak WiFi signal: the link is slow or drops |
| −130 dBm | 0.1 fW | About the strength of a GPS signal at the ground |
The gap between sending and receiving is the path loss. A router sending 20 dBm that you see at −60 dBm across the house has lost 80 dB, a factor of 100 million. To work out that part from the distance and frequency, use the link budget calculator.
Formulas
- Watts from dBm: W = 10(dBm − 30) / 10. Back again: dBm = 10 × log10(mW) = 10 × log10(W) + 30. And dBW = dBm − 30.
- Voltage from power: V rms = √(W × R), where R is the impedance in ohms. For a sine wave, V peak = V rms × √2 and V peak-to-peak = 2 × V peak.
- dBµV = 20 × log10(V rms ÷ 1 µV) and dBmV = dBµV − 60.
- Straight from dBm: dBµV = dBm + 90 + 10 × log10(R), which is dBm + 106.99 at 50 Ω and dBm + 108.75 at 75 Ω.
Power uses 10 × log10 and voltage 20 × log10 because power grows with the square of the voltage. That is why 10 dB more power is only 3.16 times the voltage.
Tips for accurate results
The voltage boxes assume a steady sine wave into a load that matches the impedance you chose. A modulated signal such as WiFi or 5G has peaks well above √2 times its rms value, so do not use V peak to size a part for those. If the load is not matched, part of the power comes back and the voltage on the line changes along its length; the VSWR calculator shows how much.
A dBm figure on a spectrum analyzer is the power inside its resolution bandwidth, not always the power of the whole signal. A transmitter's dBm is what leaves its socket; add the antenna gain and take away the cable loss to get EIRP. Audio gear uses dBu, which is 0.775 V and has nothing to do with dBµV, so take care with old meters. For more RF tools, see RF tools and calculators.
FAQ
How do you convert dBm to watts?
W = 10^((dBm − 30) / 10). So 30 dBm = 1 W and 40 dBm = 10 W.
What is 0 dBm in mW?
Exactly 1 mW.
Why does impedance matter?
Voltage units depend on the load: the same power is a different voltage at 50 Ω and 75 Ω.
What is dBµV?
Voltage compared with 1 µV. At 50 Ω, dBµV = dBm + 107.