Resonance frequency finder (tap test)

Tap a glass, a bell, a guitar top or a metal bar and see every frequency it rings at, with its Q factor.

Press Arm, then tap the object

Hold the object lightly, put the mic 10–30 cm away and tap once with something hard. Your sound stays on this device.

Or drop a recording of one or more taps here.

Strongest peak—
Q factor—
Ring time (T60)—
Taps0 of 5

Ringing peaks
#HzNotedBQBW

BW = −3 dB bandwidth. Q = frequency ÷ BW. * = Q from the decay time (very sharp peak). † = overlapping peak, split by the curve’s shape. dB = level below the strongest peak.

Capture
Frequency range

A narrower range leaves out handling noise and the mic’s own hiss.

Source and demo

Sound is analysed on this device and never uploaded. The demo objects are made up for testing and play no sound.

Export and share
Recent results
    Sound never leaves your device. Nothing is uploaded. Space arm/stop←→ peakN new object

    How to use the resonance finder

    1. Hold the object so it can ring freely: hang a glass or bell by its stem or handle, rest a bar on two strips of foam, or hold a guitar top by its edge.
    2. Put your phone or laptop mic 10 to 30 cm away. Choose Low for wood and panels or High for glass and metal if you know roughly where it rings.
    3. Press Arm and keep quiet for half a second while the tool measures the room noise. When it says Tap now, tap the object once with a pencil, a fingernail or a small rubber mallet.
    4. Keep still while it listens to the ring. It then waits for the ring to die away and arms itself again, so tap 5 times (or the number you set) to get an average.
    5. Read the peaks in the table, press a peak to see how it decays, and save the result with CSV or PNG. Press New object before you tap something else.

    You can also open a recording with one or more taps in it. The tool finds up to 10 taps, measures each one and averages them, just as it does live.

    How to read peaks, Q and bandwidth

    784 Hz −3 dB bandwidth 0.33 Hz Q = 784 ÷ 0.33 ≈ 2,400 high Q: narrow, rings long low Q: wide, dies fast Frequency (the width is drawn larger than it is)
    A sharp peak from the made-up wine glass demo next to a broad one.

    Each numbered peak is one way the object likes to vibrate, called a mode. The table gives its frequency, the nearest musical note and its level in dB below the strongest peak. The lowest strong peak is usually the tone you hear as the object’s pitch; the higher ones colour the sound.

    The bandwidth is how wide the peak is where it has fallen 3 dB from its top. Q, the quality factor, is the frequency divided by that width. A peak at 200 Hz that is 10 Hz wide has a Q of 20: it sounds like a short knock. A glass at 784 Hz with a width of 0.33 Hz has a Q of about 2,400 and keeps singing for seconds.

    Two ways to measure Q

    For most peaks the tool reads the width straight from the spectrum. A very sharp peak can be narrower than a short capture can show, because a 2 second capture can only split frequencies about 0.5 Hz apart. For those peaks, marked with *, it tracks how fast that one frequency dies away instead. The ring time T60 is how long the peak takes to fall by 60 dB, and Q follows from it: Q = π × frequency × T60 ÷ 6.91. The decay chart shows the fitted line, so you can see if the decay was clean or wobbly.

    Overlapping peaks

    When two modes sit close together they merge into one bump with a shoulder. The tool looks at how the curve bends (its second derivative) and lists a hidden peak it finds there with a †. Its Q comes from the curve’s shape, so treat it as a good estimate rather than an exact value.

    Use cases

    Wine glass

    Hold the glass by its foot and tap the rim with a fingernail, using a 3 second capture. A thin glass gives one strong peak with a Q in the thousands and a few weaker modes above it. If you are tuning glasses with water for a glass harp, tap after each pour: the main peak moves down as the water level rises, and the note column tells you how close you are.

    Guitar tonewood and tops

    Luthiers tap a top or a back while holding it at a node, the spot that hardly moves, and listen for a clear, ringing tone. Here you can put a number on it. Use the Low range and a 0.5 or 1 second capture, tap 5 to 10 times and save each stage with a label such as “top before bracing”. Comparing the peak frequencies and their Q before and after thinning or bracing shows what changed far better than memory does.

    Bells and chimes

    A bell rings with several strong partials that do not follow a simple harmonic series, which is why the tool lists every peak, not just the loudest. A metal bar or tube hung at its nodes rings with overtones near 2.76 and 5.40 times the lowest mode. If your chime’s overtones land far from those ratios, the hanging point or the material is probably damping it.

    Speaker cabinet panels

    Knock on the side of a speaker box with a knuckle, with the mic 10 cm from that panel. A thin panel shows up as a peak in the low hundreds of hertz with a modest Q, for example 180 Hz at Q 15. After you add a brace or damping, tap the same spot again: a lower, wider peak that dies faster is the result you want.

    Tips for accurate results

    Support the object lightly. A hand wrapped round a glass or a bar laid flat on a table damps the ring and lowers the Q you measure, so hang it, hold it at the stem, or rest it on soft foam at its nodes. Tap with something hard and small, such as a pencil, a fingernail or a plastic pick: a soft tap only excites the low modes. Tap once and keep still, because a second tap during the capture mixes two rings.

    A quiet room helps, since the ring has to stand above the background noise. Phone mics with automatic gain can turn the level up as the ring fades and make it look longer; the badge shows when the browser keeps auto gain on. The tool measures sound only, so it finds modes that make sound. If you want to see the overtones of a note that keeps playing, use that tool instead, and the live spectrum analyzer shows any sound as it happens. More tests are in the speaker and audio test tools.

    FAQ

    What is a resonant frequency?

    The frequency an object rings at by itself when struck.

    What does Q mean?

    How sharp the resonance is: high Q rings long and narrow, low Q dies fast and wide. Q = frequency ÷ bandwidth.

    Can I find a room or machine resonance with it?

    Rooms: use the room tools. Machine vibration belongs to a vibration tool, not this one.

    Why do I get several peaks?

    Most objects have several modes; the lowest strong one is usually the main tone.

    Written and tested by the SpectrumAnalyzer.app team · Last checked

    How we tested: Checked with made-up taps of known frequency and Q (one ringing tone from Q 20 to Q 2,400, plus a made-up wine glass, guitar top and metal bar), and with the site's own test files for the edge cases (steady sine, silence, a 50 ms file and a decaying noise burst with no ringing tone).