WiFi channel overlap planner

Add the WiFi networks around you and see which channel overlaps the least. Works for 2.4, 5 and 6 GHz.

Best channel: 11 clear

2451–2473 MHz, centre 2462 MHz. Add your neighbours' networks below for a real suggestion; with none, every legal channel is clear.

Next best: 6 (clear), 1 (clear), 2 (clear).

Add a neighbouring network

Browsers cannot scan WiFi, so type what your phone or router shows. Not sure of the signal? −50 is a network next door, −65 a typical neighbour, −80 a faint one.

Networks you added

    None yet. Each network you add is drawn on the chart and counted in the suggestion.

    Channel table for this band and region

    How to use the WiFi channel planner

    1. Pick the band and your region. The region decides which channels are legal; channels your country does not allow are greyed out.
    2. Find your neighbours' channels. On Android, open Settings → Wi-Fi, tap a network and look for frequency or channel, or use a free WiFi analyzer app, which lists every network with its channel, width and signal in dBm. On an iPhone, the built-in screens do not show channels; the AirPort Utility app has a Wi-Fi scanner (turn it on in Settings → AirPort Utility). On Windows, open a command prompt and type netsh wlan show networks mode=bssid: it lists each network's channel and signal (as a percentage; 100 % is about −50 dBm, 50 % about −75 dBm). On a Mac, hold Option and click the WiFi icon. Many routers also show a "site survey" or "neighbouring networks" page.
    3. Add each network with its channel, width and signal. Skip very faint ones (below about −85 dBm): they hardly matter.
    4. Choose your width and read the suggestion. Set that channel in your router's wireless settings, and turn "auto channel" off if it keeps moving you back.

    How to read the chart

    161113 neighbour ch 1, −50 dBm ch 6, −72 dBm you: ch 11 (clear) a 40 MHz network on ch 3 2.4 GHz channels are only 5 MHz apart, but each one is 20 MHz wide
    Each arch is one network, as wide as its channel; taller arches are stronger signals.

    Every network is drawn as an arch that covers the frequencies it uses. The arch is as wide as the channel (20 MHz for a normal 2.4 GHz network, up to 160 MHz on 5 GHz and 320 MHz on 6 GHz) and taller when the signal is stronger. Where two arches overlap, the two networks share the air and slow each other down.

    The dashed amber arch is the channel the planner suggests for you. It scores every legal channel at your width: the more MHz it shares with a neighbour, and the stronger that neighbour, the worse the score. Partial overlap counts 1.5 times as much as sitting on exactly the same channel. That sounds odd, but routers on the same channel take turns politely, while a router two channels away just hears noise and both lose. The label says "clear", "light use", "busy" or "crowded". Click anywhere on the chart to see the score of the channel there.

    On 5 GHz the shaded part is the DFS range, and on 6 GHz the green channel numbers are the PSC channels. Both are explained below. Grey numbers are channels your region does not allow.

    Use cases

    Apartment block

    In a flat you might see 15 networks on 2.4 GHz, most of them on 1, 6 and 11. Add the strongest five or six (say channel 1 at −58 dBm, 6 at −62 and −70, 11 at −75). The planner picks 11, the channel with the weakest neighbours, instead of a "free" channel like 3 that overlaps both 1 and 6. Better still, move what you can to 5 GHz, where there are 25 channels instead of 3.

    Mesh system

    Mesh nodes talk to each other over one channel, often an 80 MHz one on 5 GHz. If a neighbour already uses 36–48 at −60 dBm, choose an 80 MHz block that does not touch it: 149–161 is a good pick in the US, UK, India and Australia. In the EU, where 149 and up are not normal WiFi channels, the choice is between DFS blocks such as 100–112, or a narrower 40 MHz channel.

    Gaming lag

    Ping spikes of 100 ms or more every few seconds often come from a crowded channel or from a DFS channel that has to stop for radar. Turn on "Avoid DFS channels", plan a 5 GHz channel with no overlap, and keep the console on 5 GHz. If the only clear channels are far away, a 40 MHz channel that is clear beats an 80 MHz channel that overlaps.

    2.4 vs 5 vs 6 GHz

    2.4 GHz reaches furthest and goes through walls best, but it has only three channels that do not overlap (1, 6 and 11 in most countries) and it is shared with Bluetooth, baby monitors and microwave ovens. Keep it at 20 MHz. 5 GHz has up to 25 channels of 20 MHz and room for 80 or 160 MHz channels, so it is much faster at short range, but it loses about a wall's worth of range compared with 2.4 GHz. 6 GHz (WiFi 6E and WiFi 7) adds up to 59 more channels, wide 160 and 320 MHz channels and no older devices to slow things down, but it has the shortest range and needs new phones and routers. On 6 GHz, PSC (preferred scanning channels) are every fourth 20 MHz channel, 5, 21, 37 and so on; devices look there first, so routers usually sit on one of them. To see how much each wall and metre costs, try the path loss calculator.

    DFS channels explained

    5 GHz channels 52 to 144 are shared with weather and military radar, so the rules call for DFS (dynamic frequency selection). Before using one, a router must listen for a minute (ten minutes on some channels near weather radar), and if it hears radar it must leave within seconds. That can cause a short drop. In return, DFS channels are often empty, so they are great when your area has no radar nearby. If you see drops at the same times every day, turn on "Avoid DFS channels". This page cannot see radio signals itself: it works from what you type in. More RF tools are on the RF tools page.

    The channel rules here follow each region's main WiFi rules and may lag behind recent changes, especially for 6 GHz and the UNII-4 channels 169 to 177. Your router's region setting only offers the channels that are legal where you live, so trust it when it disagrees.

    FAQ

    Which 2.4 GHz channels do not overlap?

    1, 6 and 11 (20 MHz wide) in most countries.

    Should I use 40 MHz on 2.4 GHz?

    Usually no; it overlaps almost the whole band and slows neighbours and you.

    What are DFS channels?

    5 GHz channels shared with radar; the router must leave them if radar appears, which can cause short drops.

    Can the site scan my WiFi?

    No, browsers cannot scan WiFi. Read the channels from your phone or router and add them.

    Written and tested by the SpectrumAnalyzer.app team · Last checked

    How we tested: Checked with worked examples: with neighbours on channels 1 and 6 at 2.4 GHz the planner picks 11; with an 80 MHz neighbour on 36 at 5 GHz it moves an 80 MHz network to the 149–161 block (or a DFS block if allowed); channel 6 is centred at 2437 MHz, 36 at 5180 MHz and 6 GHz channel 37 (PSC) at 6135 MHz.