Free space path loss and link budget calculator
Type the frequency and distance for the free space path loss, then add powers, gains and losses for the received level, fade margin, range and Fresnel zone.
Path
Free space path loss: 100.05 dB over 1 km at 2.4 GHz.
Link budget
Received −78.1 dBm, fade margin 11.9 dB.
Fade margin 11.9 dB. Good for a fixed outdoor link in clear weather.
| Step | Value | Level |
|---|---|---|
| TX power | 20.0 dBm | 20.0 dBm |
| TX cable loss | −1.0 dB | 19.0 dBm |
| TX antenna gain | +2.0 dB | 21.0 dBm |
| EIRP | 21.0 dBm | |
| Free space path loss | −100.1 dB | −79.1 dBm |
| Other losses / extra margin | 0.0 dB | −79.1 dBm |
| RX antenna gain | +2.0 dB | −77.1 dBm |
| RX cable loss | −1.0 dB | −78.1 dBm |
| Received level | −78.1 dBm | |
| RX sensitivity | −90.0 dBm | |
| Fade margin | 11.9 dB |
- Free-space range of this link: 3.96 km at 0 dB fade margin, 1.25 km with 10 dB and 396 m with 20 dB.
- First Fresnel zone radius 5.59 m at the middle of the path; keep at least 60 % (3.35 m) clear of trees, roofs and ground.
- Wavelength 12.5 cm. Doubling the distance or the frequency adds 6.02 dB of path loss.
How to use the path loss calculator
- Type the frequency and the distance, or press a band button. The free space path loss shows straight away under them.
- Fill in the link budget: the transmitter power in dBm, the cable loss and antenna gain at each end, and the receiver sensitivity from its data sheet. Use Other losses for walls, trees or an extra safety margin.
- Read the received level, the fade margin and its verdict, how far the link could reach, and the Fresnel zone that must stay clear. Then use Copy budget or Share link.
Worked example: 2.4 GHz over 1 km
Free space path loss in decibels is 20 × log10(distance in km) + 20 × log10(frequency in MHz) + 32.45. For 1 km at 2,400 MHz that is 0 + 67.60 + 32.45 = 100.05 dB, which matches the round "100 dB" you often read for WiFi over a kilometre.
Now the budget. A 20 dBm radio loses 1 dB in its cable and gains 2 dBi from its antenna, so it radiates 21 dBm (the EIRP). After 100.05 dB of path loss, −79.05 dBm reaches the far antenna, which adds 2 dBi before its own 1 dB cable takes some back: the receiver gets −78.05 dBm. If it can decode down to −90 dBm, the fade margin is 11.95 dB. That works on a clear day, but there is not much to spare.
The Fresnel radius at the middle is 5.6 m. Keep at least 60 % of it, about 3.4 m, free of trees, roofs and ground, which usually means masts rather than windowsills. In free space this budget would reach 3.96 km before the margin runs out, or 1.25 km with 10 dB in hand.
Use cases
Point-to-point WiFi
You want to bridge two buildings 5 km apart at 5.5 GHz with 23 dBi dish antennas and 20 dBm radios, losing 1 dB of cable at each end. The path loss is 121.2 dB and the signal arrives at −57.2 dBm. If your radio's data sheet asks for −75 dBm at the speed you want, you have 17.8 dB of fade margin. The Fresnel radius in the middle is 8.3 m, so the dishes must clear the rooftops between them by about 5 m.
LoRa range
A LoRa node at 868 MHz sends 14 dBm through a 2 dBi antenna to a gateway with another 2 dBi antenna. Say the module's data sheet gives −130 dBm sensitivity at the setting you use. The link can take 148 dB of path loss, which in free space is 690 km, or 69 km with a 20 dB margin. That only holds with a clear line of sight, such as hilltop to hilltop. In a town, type 30 dB into Other losses for buildings in the way and the range with 10 dB of margin drops to about 7 km.
Drone video link
An FPV drone at 5.8 GHz sends 25 mW (14 dBm) through 2 dBi antennas, and say the goggles need −85 dBm for a clean picture. The link can take 103 dB, which is 581 m in free space but only 184 m with a 10 dB margin for the drone turning and tilting. At 200 mW (23 dBm) the same margin reaches about 518 m. Check which power your country and licence allow before you change it.
Formulas
- Free space path loss: FSPL = 20 × log10(4π × d × f ÷ c), with d in metres, f in hertz and c = 299,792,458 m/s. With d in km and f in MHz: FSPL = 20 × log10(d) + 20 × log10(f) + 32.45.
- Received level = TX power − TX cable loss + TX antenna gain − FSPL − other losses + RX antenna gain − RX cable loss.
- Fade margin = received level − RX sensitivity.
- First Fresnel zone radius: r = √(λ × d1 × d2 ÷ d), where λ = c ÷ f and d1, d2 are the distances to each end. At the middle this is r = 8.66 × √(d in km ÷ f in GHz) metres.
- Free-space range for a wanted margin M: d = (λ ÷ 4π) × 10(allowed loss − M) ÷ 20.
Limits
Free space path loss is the best case: nothing in the way and no ground. Real links lose more. Walls, floors and leaves add their own losses, ground reflections can add to the signal or cancel it, rain matters above about 10 GHz, and past the radio horizon the curve of the Earth blocks the path. Antenna gains in data sheets are for the best direction, so a tilted or badly aimed antenna gives less. Keep a healthy fade margin to cover all of this. To change watts into dBm for the budget, use the dBm converter; to pick a clean channel for a WiFi link, see WiFi channels. More tools are on the RF tools page.
FAQ
What is free space path loss?
The loss of signal strength over distance in open space, with no walls or ground in the way.
Does higher frequency lose more?
Yes in this formula: doubling the frequency adds 6 dB of loss over the same distance (with the same antennas).
What fade margin do I need?
10–20 dB for reliable links outdoors; more in rain or with moving devices.
What is the Fresnel zone?
The oval space around the line of sight that should be at least 60 % clear for full signal.