Harmonics and overtone analyzer
Play or sing one steady note and see harmonics 1 to 16 as bars, with brightness, odd/even balance and inharmonicity.
Play or sing one steady note
Hold the note for a second or two, close to the mic. One note at a time: chords hide the pattern.
Or drop a recording of one note here.
Harmonics
| # | Hz | dB vs H1 | Cents |
|---|
Cents = how far each partial sits from an exact multiple of the note (100 cents = one semitone). “noise” = lost in the background noise.
Compare A and B
Source and detail
Longer analysis separates the harmonics of low notes better but reacts more slowly. Sound is analysed on this device and never uploaded.
Export and share
Recent results
How to use the overtone analyzer
- Press Listen and allow the microphone. You can also choose Audio file to open a recording, or tap one of the demo sounds.
- Play or sing one note and hold it for a second or two, 20 to 50 cm from the mic. The bars update about seven times a second.
- Press Hold (or the F key) to freeze a good reading, then Save A to keep it as snapshot A.
- Play a second instrument or string and press Save B. The chart switches to A vs B, with the two sets of bars side by side.
- Save the numbers with CSV, or a picture of both charts with PNG.
With a recording, the tool looks through the file and picks the steadiest loud note on its own. Move the Moment slider to measure any other point, for example the bright start of a piano note and then its softer tail.
How to read the bars
The first bar, H1, is the note itself: the fundamental. Each bar after it is a harmonic at a whole multiple of that frequency, so on a 110 Hz note H2 sits at 220 Hz, H3 at 330 Hz and H8 at 880 Hz. The height shows how loud each one is compared with the fundamental. −6 dB is half the size, −20 dB a tenth, and a missing bar means that harmonic is lost in the noise. The lower chart shows the same note as a spectrum, with dashed lines at the exact multiples, so you can see whether each peak sits on its line.
The four readouts sum the pattern up. Brightness is the centroid of the harmonics: 1.0× means only the fundamental, 2.1× means the sound energy sits, on average, a little above the second harmonic. Odd / even compares the overtones H3, H5, H7… with H2, H4, H6… in dB; a big plus number means a hollow, clarinet-like colour. Inharmonicity shows how far the upper partials drift sharp of the exact multiples, as the string constant B and in cents.
Use cases
Compare two guitars
Play the open A string (110 Hz) on the first guitar, press Hold and Save A. Do the same on the second guitar, at the same distance and with the same pick, and press Save B. If A reads a brightness of 2.4× and B 3.6×, B has much more energy in its upper harmonics and will sound brighter and more cutting. The same test shows the difference between old and new strings, or between picking near the bridge and over the neck.
Overtone singing practice
Sing a low, steady drone, say 150 Hz, and slowly change the shape of your mouth and tongue. In overtone singing one harmonic is made much louder than its neighbours, and on the bars it jumps 10 dB or more above them. With the drone at 150 Hz, a strong eighth harmonic shows up at 1,200 Hz. Watching which bar rises makes it much easier to find and hold the right mouth shape.
Piano inharmonicity
Piano strings are stiff, so their partials sit a little sharp of exact multiples, and more so the higher they go. The tool fits this drift and shows it as B. With B = 0.0004 the 10th partial sits about 34 cents sharp. This is one reason why pianos are tuned with slightly stretched octaves. Measure a few notes across the keyboard, look at the cents column and compare the bass with the middle.
Synth sound design
A sawtooth has every harmonic at 1/n (H2 −6.0 dB, H3 −9.5 dB), a square wave has only odd ones, and a low-pass filter pulls down the upper bars. Record a real instrument, save it as A, then shape a synth patch until its bars come close as B. Matching the first eight harmonics gets you surprisingly near the real sound.
Why instruments sound different
Play A4 at 440 Hz on a flute, a clarinet and a violin and all three have the same pitch, yet nobody mixes them up. The difference is timbre, or tone colour, and a large part of it is the mix of overtones. A flute has a strong fundamental and fairly weak upper harmonics, most of all on its high notes. The low notes of a clarinet are known for weak even harmonics, which gives them their hollow sound. A bowed violin string makes a wave close to a sawtooth, rich in every harmonic, and its wooden body then boosts some areas and cuts others.
The voice works the same way: your vocal folds make a buzz full of harmonics, and the shape of your mouth lifts some of them. Those lifted areas are the formants that make vowels, which the voice formants tool shows on a vowel chart. Timbre also lives in time: the scrape of a bow, the thump of a piano hammer and how fast each harmonic dies away. This tool measures one moment of the steady part. To see a whole note over time, use the spectrogram, and for where each instrument sits on the frequency scale, see the instrument frequency ranges.
Tips for a clean reading
Play one note at a time and let it ring: the analysis looks at about a third of a second of sound, so fast notes and strong vibrato smear the upper harmonics. Keep the room quiet and the mic 20 to 50 cm away; much closer, loud notes can overload it. Phone and laptop mics lose the lowest notes, so on a bass guitar the first bar can read too low. The tool then measures against the strongest harmonic and says so. Turn off any noise suppression in a calling app before you use the mic here, because it can remove steady tones. For the full picture of a sound, the live spectrum analyzer shows every frequency at once. More tools are in the list of more audio analyzers.
FAQ
What are overtones?
Extra tones above the note you play. Their mix is why a violin and a flute sound different on the same note.
Overtone or harmonic?
Harmonics are overtones at exact whole multiples of the note. Real strings and bells drift a little, which the tool shows as inharmonicity.
Is this a tuner?
No, it shows tone colour. To check pitch, use a frequency detector.
Why do I see no harmonics?
Play one steady note close to the mic; chords and noise hide the pattern.