Audio file checks · Guide
Loudness targets for every platform (LUFS chart)
Every big streaming service plays music at roughly the same loudness, so a track mastered louder is simply turned down. This page lists the target of each platform in one table: the loudness in LUFS, the true-peak advice, whether the volume matching is on by default and whether quiet tracks are turned up. Type your own track’s loudness into the calculator to see what each one will do with it.
Targets checked November 22, 2026; platforms can change them. “Reported” means the platform does not publish the figure and it comes from engineers’ measurements. Press a column heading to sort.
| Spotify | −14 LUFS Loud −11, Quiet −19 | −1 dBTP −2 dBTP if louder than −14 | Normal (−14) is the default level in the apps Web player: no | Yes, until peaks reach −1 dBTP |
|---|---|---|---|---|
| Apple Music | −16 LUFS reported (Sound Check) | Not published −1 dBTP is the safe choice | On for new installs since 2022 reported | Only as far as peaks allow reported |
| YouTube | About −14 LUFS reported | Not published | Yes reported | No reported |
| Amazon Music | About −14 LUFS reported | Not published | A switch in the apps default not confirmed | No reported |
| Tidal | About −14 LUFS reported, by album | Not published | Yes reported | No reported |
| Deezer | −15 LUFS stated by Deezer staff in 2019 | Not published | A switch in the apps | Not documented |
| SoundCloud | −14 LUFS its advice | −1 dBTP −2 dBTP if louder | Reports differ | Not documented |
| Podcasts | −16 LUFS ±1 mono: −19 LUFS | −1 dBTP | A target to deliver Apple Podcasts’ advice | — |
| EBU R128 (TV and radio, Europe) | −23 LUFS ±0.5 ±1 LU for live | −1 dBTP | A standard to deliver | — |
| ATSC A/85 (TV, US) | −24 LKFS ±2 | −2 dBTP | A standard to deliver | — |
Try it: what happens to my track?
Type your track’s integrated loudness and true peak, as the LUFS meter shows them.
- Spotifyturned down 5.0 dB; true peak −0.5 dBTP is over the −2 dBTP advice
- Apple Musicturned down 7.0 dB; true peak −0.5 dBTP is over the −1 dBTP advice
- YouTubeturned down 5.0 dB; true peak −0.5 dBTP is over the −1 dBTP advice
- Amazon Musicturned down 5.0 dB; true peak −0.5 dBTP is over the −1 dBTP advice
- Tidalturned down 5.0 dB; true peak −0.5 dBTP is over the −1 dBTP advice
- Deezerturned down 6.0 dB; true peak −0.5 dBTP is over the −1 dBTP advice
- SoundCloud5.0 dB louder than its advice; true peak −0.5 dBTP is over the −2 dBTP advice
- Podcaststurn it down 7.0 dB to reach −16
- EBU R128 (TV and radio, Europe)turn it down 14.0 dB to reach −23
- ATSC A/85 (TV, US)turn it down 15.0 dB to reach −24
What loudness normalisation does
Loudness normalisation is automatic volume matching. When you upload a track, the service measures its integrated loudness with the ITU-R BS.1770 method, the same one the LUFS meter uses: one number in LUFS for the whole song. When someone plays it, the player changes the volume by the difference between that number and its target. A song at −9 LUFS on a −14 LUFS service is played 5 dB quieter; a song at −14 is left alone.
The change is a plain volume change, like turning a knob. Nothing is compressed or limited when a track is turned down, so it keeps whatever dynamics it had. Turning up is different, because raising a quiet track also raises its peaks, and peaks above full scale would clip. That is why services that turn quiet tracks up limit how far they go, and why some do not turn up at all.
Why loudness and not peaks? Two tracks can both peak at 0 dBFS and still differ in loudness by 10 dB, because one is a sparse acoustic song and the other a dense, limited dance track. LUFS follows what the ear hears: it weights the frequencies the way our hearing does and averages over the whole song, so matching LUFS makes tracks feel equally loud.
Two more details matter. Some services match whole albums rather than single songs, so a quiet ballad stays quieter than the loud single next to it when the album plays in order. Spotify does this for albums and matches each track alone in playlists and on shuffle. And listeners can often switch the matching off or choose another level, so you cannot count on every play being normalised. The safest plan is a master that sounds good at its own level and holds up when turned down.
Platform by platform
Spotify
Spotify publishes its rules. It adjusts tracks to −14 LUFS by default, and Premium listeners can choose Loud (−11) or Quiet (−19) instead. Louder tracks are turned down. Quieter tracks are turned up, but only until their true peak reaches −1 dBTP, so a quiet track with high peaks stays quieter. Spotify advises keeping masters below −1 dBTP, or below −2 dBTP if the master is louder than −14 LUFS. Its web player and some speakers and TVs do not normalise.
Apple Music
Apple calls its volume matching Sound Check but does not publish a target. Engineers who measured it report about −16 LUFS since 2022, when Apple moved to LUFS-based matching and turned Sound Check on for new installs. Quiet tracks are reported to be raised only as far as their peaks allow. With no official true-peak figure, −1 dBTP is the sensible ceiling.
YouTube
YouTube does not publish a figure either. Measurements since 2019 point to about −14 LUFS, and to an important difference: YouTube turns loud videos down but does not turn quiet ones up. A quiet video therefore plays quieter than its neighbours. YouTube Music has been measured to behave differently from the main site, and both can change without notice.
Amazon Music
Amazon Music has a loudness normalisation switch in its apps, but its help pages give no target. Engineers report about −14 LUFS and no turning up of quiet tracks, while a few sources quote louder figures. Whether the switch is on by default is not confirmed, so treat −14 as the likely level and check your track there.
Tidal
Tidal has no public help page on this. Published measurements and an AES paper report about −14 LUFS, matched by album, and no turning up of quiet tracks. Because Tidal works by album, a track keeps its place in the album’s dynamics.
Deezer
Deezer’s help pages describe a normalisation switch in its apps without a number. A Deezer staff answer from 2019 gave −15 LUFS per track and said it might change. Whether it raises quiet tracks is not documented.
SoundCloud
SoundCloud’s own advice is to master to −14 LUFS integrated and keep true peak below −1 dBTP, or −2 dBTP for louder masters. Reports differ on whether it actually turns tracks down when they play, so do not rely on it: a track that is very loud stays very loud for some listeners.
Podcasts
Apple Podcasts asks for about −16 LKFS (the same as LUFS) with a tolerance of ±1 dB and a true peak no higher than −1 dB. For mono files, −19 LUFS is the common rule, because a mono file played on two speakers sounds about 3 dB louder. If your host or network gives its own spec, follow that one.
Broadcast TV and radio
Broadcast has stricter rules that you must deliver to. EBU R128, used across Europe, asks for −23 LUFS ±0.5 LU (±1 LU for live shows) and a true peak no higher than −1 dBTP. ATSC A/85 in the US asks for −24 LKFS ±2 dB with true peak at or below −2 dBTP; it was revised in 2026, so check the current version before a delivery.
Should you master to −14?
No, not by rule. −14 LUFS is where several services play music, not a quality target. A master at −10 or −8 LUFS is simply turned down by 4 to 6 dB on those services, and next to tracks that kept their punch it can sound flat and small. A master at −14 is left alone there, but on a platform that does not normalise, such as some web players, it will sound quieter than a loud master.
A better way to think: make the master as loud as the music needs and no louder. Dance and rock are often mastered louder than acoustic music, and that is fine as long as the drums still hit. If you have to squash the mix to reach a loudness, the turned-down version will show it. Going quieter than −14 has its own cost on YouTube, Amazon and Tidal, which are reported not to raise quiet tracks: a −20 LUFS master plays about 6 dB under everything else.
A simple test helps you decide. Turn your master down to −14 LUFS in your editor, play a favourite commercial track at the same loudness, and switch between the two. If yours sounds smaller or duller, the extra loudness cost you punch; if it holds up, the master is fine at any level.
True peak matters at any loudness. Lossy formats such as Ogg Vorbis and AAC can push peaks higher than in your WAV, so a ceiling of −1 dBTP, or −2 dBTP for loud masters, keeps the streamed copy clean. Check the master for clipped spots too: the clipping detector finds every flat top and true-peak over with its time.
Check your track
Open your master in the LUFS meter. It reads integrated loudness, short-term and momentary loudness, loudness range and true peak, then shows the change on every platform in this table at once, for one file or a whole album. Nothing is uploaded.
More checks for files before release, from fake FLACs to stereo phase, are on the audio file checks page.
FAQ
What LUFS does Spotify use?
−14 LUFS integrated by default, with a “Loud” setting at −11 and “Quiet” at −19.
What is YouTube's loudness target?
About −14 LUFS; YouTube turns louder videos down but does not turn quiet ones up.
What loudness for podcasts?
−16 LUFS for stereo is Apple’s advice for podcasts, and −19 LUFS is the common choice for mono files.
Do I have to master to −14?
No. Master for the best sound; platforms adjust the volume. Very loud masters only lose dynamics.